Hello Claude !!!
I’m trying to make the setup for "ELATION SIXPAR 300� and ELATION© ARENA PAR ZOOM.
https://www.dropbox.com/s/5rxikgksg4i9m ... p.png?dl=0
"ARENA PAR ZOOM� :
Since I did not find “ZOOM� in the import scrolling menu, I used �iris" instead. Is it OK?
But I don’t know what to do with 13 and 14 ???
"SIXPAR 300� :
Same thing. Can not find correspondance in the import scrolling menu for 10-11-12.
What we do in that case ?
Thanks a lot !
Elation led setup
It does not really matter what subchannel you use for these functions because they are not really standardized in the way more common ones are. They don't mean the same thing across fixtures anyway. So use them in a way that makes sense to you.
I might suggest "Control" for the dimming curve parameters.
It looks like you found "Color Macros" but might want to choose either "FX" or "FX Macros" for the color chase functions. The speed parameter could use either "Color Speed" or "F/X Speed".
Zoom, by the way, is called "Beam" it has a dedicated slider in the Inspector's channel tab next to the Iris slider, reflecting that both parameters change the size of the light's cone.
I might suggest "Control" for the dimming curve parameters.
It looks like you found "Color Macros" but might want to choose either "FX" or "FX Macros" for the color chase functions. The speed parameter could use either "Color Speed" or "F/X Speed".
Zoom, by the way, is called "Beam" it has a dedicated slider in the Inspector's channel tab next to the Iris slider, reflecting that both parameters change the size of the light's cone.